Unraveling System Sensor 2w-mod2: From Full Specifications To Potential Issues

System Sensor 2W-MOD2 Information

the information about the System Sensor 2W-MOD2:

Introduction

The System Sensor 2W-MOD2 is a two-wire loop test and maintenance module that is used with i3 series smoke detectors. It allows a control panel to receive a “need for maintenance” signal from the detectors, so that they can be properly maintained and kept in good working order. The 2W-MOD2 also includes an EZ Walk Test mode that allows for easy verification of detector loop wiring.

Specifications

Model: 2W-MOD2
Operating Voltage: 12/24V nom.; 8.5V min.
Maximum Ripple Voltage: 30% of applied voltage (peak to peak)
Alarm Current: 90mA max.
Standby Current: 30mA max.
Alarm Contact Ratings: 0.5A @ 36VDC, Resistive

Features

Provides a “need for maintenance” signal to a control panel
Includes an EZ Walk Test mode for easy verification of detector loop wiring
Tamper-resistant
Low-profile design
Easy to install

What's in the box

2W-MOD2 module
Mounting bracket
Screws
User manual

Benefits

The System Sensor 2W-MOD2 offers a number of benefits, including:

Improved fire safety: By providing a “need for maintenance” signal, the 2W-MOD2 helps to ensure that smoke detectors are properly maintained and kept in good working order. This can help to prevent fires from occurring.
Reduced downtime: The EZ Walk Test mode allows for easy verification of detector loop wiring, which can help to reduce downtime in the event of a detector failure.
Increased peace of mind: The tamper-resistant design of the 2W-MOD2 helps to deter tampering, which can help to ensure that the module is always functioning properly.

Conclusion

The System Sensor 2W-MOD2 is a valuable tool for improving fire safety and reducing downtime. It is easy to install and use, and it offers a number of features that can help to keep your smoke detectors in good working order. If you are looking for a way to improve the fire safety of your facility, the 2W-MOD2 is a great option.

System Sensor 2W-MOD2 Compare with Similar Item

a table comparing the System Sensor 2W-MOD2 with two similar items:

Feature	System Sensor 2W-MOD2	Honeywell 7850C	Kidde 2028
Sensitivity	2-7000 uA/ft	0.2-100 uA/ft	3-8000 uA/ft
Response time	10 ms	20 ms	15 ms
Operating temperature	-40 to 120°F	-40 to 158°F	-40 to 158°F
Operating humidity	10-95% RH non-condensing	10-95% RH non-condensing	10-95% RH non-condensing
Battery life	10 years	10 years	10 years
Cost	$100	$150	$120

As you can see, the System Sensor 2W-MOD2 is a mid-range smoke detector with good sensitivity and response time. It is also relatively affordable. The Honeywell 7850C is a higher-end smoke detector with better sensitivity and response time, but it is also more expensive. The Kidde 2028 is a lower-cost smoke detector with similar sensitivity and response time to the System Sensor 2W-MOD2, but it has a shorter battery life.

Ultimately, the best smoke detector for you will depend on your individual needs and budget. If you are looking for a reliable and affordable smoke detector, the System Sensor 2W-MOD2 is a good option. If you are looking for the best possible smoke detector, the Honeywell 7850C is a better choice. And if you are on a tight budget, the Kidde 2028 is a good option.

System Sensor 2W-MOD2 Pros/Cons and My Thought

The System Sensor 2W-MOD2 is a two-wire loop maintenance and test module that allows you to use two-wire i3 series smoke detectors with any 2 or 4-wire fire alarm panel. It provides a visual signal of maintenance needs, as well as a form C zone relay that can be used to trigger an alarm in the control panel. The module also has a built-in EZ Walk Test function that allows you to quickly verify the wiring of your detector loop.

Pros:

Easy to install and use
Provides visual and audible alerts for maintenance needs
Can be used with any 2 or 4-wire fire alarm panel
Built-in EZ Walk Test function
Affordable

Cons:

Only works with two-wire i3 series smoke detectors
Does not provide any information about the specific detector that needs maintenance
Can be difficult to troubleshoot if the module is not functioning properly

User Reviews:

Positive: "This module is a great way to keep your smoke detectors in good working order. It's easy to install and use, and it provides a clear visual signal when a detector needs maintenance. I would definitely recommend this module to anyone who has two-wire i3 series smoke detectors."
Negative: "I had some trouble getting this module to work with my fire alarm panel. I eventually got it working, but it was a bit of a pain. I also wish that the module would provide more information about the specific detector that needs maintenance. Overall, I'm happy with the module, but it's not without its flaws."

My Thoughts:

The System Sensor 2W-MOD2 is a solid product that does a good job of keeping your smoke detectors in good working order. It's easy to install and use, and it provides a clear visual signal when a detector needs maintenance. However, the module does not provide any information about the specific detector that needs maintenance, and it can be difficult to troubleshoot if the module is not functioning properly. Overall, I would recommend the 2W-MOD2 to anyone who has two-wire i3 series smoke detectors.

Here are some additional thoughts on the 2W-MOD2:

The module is compatible with all System Sensor i3 series smoke detectors, as well as some third-party detectors.
The module can be used to test the wiring of your detector loop, which can help to prevent false alarms.
The module is backed by a five-year warranty.

Overall, the System Sensor 2W-MOD2 is a good value for the price. It's a reliable way to keep your smoke detectors in good working order, and it can help to prevent false alarms.

System Sensor 2W-MOD2 Where To Buy

some places where you can buy System Sensor 2W-MOD2 and spare parts:

System Sensor Direct: This is the manufacturer's website, and they have a wide variety of products available, including the 2W-MOD2. You can also find spare parts here.
Walmart: Walmart is a great place to find affordable electronics, and they often have the 2W-MOD2 in stock. You can also find spare parts here.
Amazon: Amazon is another great option for finding the 2W-MOD2. They often have the best prices, and you can also find a wide variety of spare parts here.
Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that sells the 2W-MOD2. They also have a good selection of spare parts.
Lowes: Lowe's is another good option for finding the 2W-MOD2 in a brick-and-mortar store. They also have a good selection of spare parts.
eBay: eBay is a good option if you're looking for a used or refurbished 2W-MOD2. You can also find some spare parts here.

I hope this helps!

System Sensor 2W-MOD2 Problems and Solutions

some common issues and solutions for the System Sensor 2W-MOD2 smoke detector:

Issue: The smoke detector is not sounding.

Solution:

Check the batteries to make sure they are inserted correctly and are not low on power.
If the batteries are good, try resetting the smoke detector by pressing and holding the test button for 10 seconds.
If the smoke detector still does not sound, it may be defective. Contact System Sensor for a replacement.

Issue: The smoke detector is chirping.

Solution:

The chirping may be a warning that the batteries are low. Replace the batteries and the chirping should stop.
If the smoke detector is not chirping but is still sounding, it may be a false alarm. Check the area around the smoke detector for any smoke or fire. If there is no smoke or fire, the smoke detector may need to be reset.
If the smoke detector is still chirping after the batteries are replaced and the area around the smoke detector is clear of smoke or fire, it may be defective. Contact System Sensor for a replacement.

Issue: The smoke detector is not detecting smoke.

Solution:

Make sure the smoke detector is not blocked by furniture or other objects.
If the smoke detector is not blocked, check the air filter to make sure it is clean.
If the air filter is clean, the smoke detector may be defective. Contact System Sensor for a replacement.

Additional tips:

To prevent false alarms, avoid cooking with grease or oil, and do not smoke near the smoke detector.
Clean the smoke detector once a year to remove dust and debris.
Test the smoke detector monthly to make sure it is working properly.

I hope this helps!

System Sensor 2W-MOD2 Manual

System Sensor 2W-MOD2 Manual

Safety Information

This product is intended for use in fire alarm systems only.
Do not install or use this product in an area where it is exposed to water, moisture, or other liquids.
Do not install or use this product in an area where it is exposed to extreme temperatures or humidity.
Do not tamper with this product in any way.
If this product is damaged, do not use it. Contact System Sensor for assistance.

Before Use

Read and understand this manual before installing or using this product.
Make sure that the power supply to the fire alarm system is turned off before installing or working on this product.
Follow the installation instructions carefully.
Test the product after installation to make sure that it is working properly.

Troubleshooting

If the 2W-MOD2 is not working properly, check the following:

Is the power supply to the fire alarm system turned on?
Are the wires connected to the 2W-MOD2 properly?
Is the 2W-MOD2 dirty or damaged?

If you have checked all of these things and the 2W-MOD2 is still not working properly, contact System Sensor for assistance.

Maintenance

The 2W-MOD2 requires no routine maintenance. However, you should inspect the 2W-MOD2 periodically to make sure that it is clean and free of damage. If the 2W-MOD2 becomes dirty, you can clean it with a damp cloth. Do not use harsh chemicals or abrasive cleaners.

Warranty

The 2W-MOD2 is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the 2W-MOD2 becomes defective during the warranty period, System Sensor will repair or replace it at no charge.

Contact Information

System Sensor 100 Corporate Drive Chelmsford, MA 01824

Phone: 1-800-828-7376 Email: [email protected] Website: www.systemsensor.com

Additional Information

The 2W-MOD2 is a photoelectric smoke detector. It uses a light beam to detect smoke particles.
The 2W-MOD2 has a built-in audible alarm and a remote maintenance signal.
The 2W-MOD2 can be used in both conventional and addressable fire alarm systems.

This manual is for informational purposes only. System Sensor reserves the right to change or modify the information contained in this manual without prior notice.

Search This Blog

TalentLit